- Call us: 01444 237070
- Contact Us
- Stores
- Sign In / Register
Spider Holster SpiderPro DSLR Dual Camera System v2
Product Code: 920016S
Share this item:
The Spider Holster SpiderPro DSLR Dual Camera System v2, is designed for working photographers to carry two cameras securely with reduced fatigue using a strap-free, instant access system.
Trade in & Trade up
Looking to trade in your photo equipment? Get a quote now!
Spider Holster SpiderPro DSLR Dual Camera System v2 Summary
Designed by photographers, the SpiderPro Dual Camera System v2 is the perfect carrying solution for the professional sport, wedding, or event photographer looking for a strap-free system for two cameras. Take the weight of your cameras off your neck and shoot longer without fatigue. Your cameras will be comfortably secured, allowing more shots per shoot with easy access.
SpiderPro Single Camera Belt v2
The Spider belt features a secure three-point release belt buckle to prevent the belt from coming loose while in use. The belt can be easily adjusted to the user’s belt size by lifting the high-strength Velcro strap and sliding the camera pad to sit comfortably on the hips. There is also a quick-adjust strap near the buckle that can be used to quickly tighten/loosen the belt slightly on the go. This belt has a pre-installed SpiderPro Camera Holster v2.
Second Camera Pad
This kit includes a camera pad that comes with a pre-installed SpiderPro Camera Holster v2. This Second Camera Pad is meant to be paired with our SpiderPro Single Camera Belt v2 and will allow you to holster a second camera on your other hip!
SpiderPro Camera Holster v2
The SpiderPro Camera Holster features a two-position, self-locking design for both security and quick access in any shooting situation. The holster will automatically lock when you pair it with one of our Spider camera plates. To unlock the holster, lift the lock lever upwards and remove your camera. For even faster access, you can disengage the lock by pressing the lock lever up until it clicks and it will remain unlocked until you push the lever back down into the self-locking position. Keeping it in the 'unlocked' position, keeps your camera secure and easily accessible for a quick draw.
DSLR Camera Plates
The SpiderPro DSLR Camera Plate attaches to any DSLR using your camera's 1/4"x 20 tripod mount, and features anti-slip rubber pads for stable, secure installation and an anti-twist Spider pin for added security. The SpiderPro DSLR Camera Plate has (2) built-in 1/4"x20 mounts that can be used for your tripod plates, eliminating the need to switch plates.
Lens Collar Plate v2
The SpiderPro Lens Collar Plate v2 is specifically designed for longer lenses, such as 70-200mm. This attaches to your lens collar using the built-in Allen wrench and features both left and right Spider pins. By holstering with the Lens Collar Plate v2, your gear will balance better for a more comfortable experience, and there will be less stress on the camera's lens mount. For tripod use, the Lens Collar Plate features an Arca-Swiss style tripod profile, while anti-slip rubber grips and anti-rotation features keep the plate aligned with the lens.
PRODUCT HIGHLIGHTS:
- Ergonomic design to eliminate fatigue
- Durable, wear-resistant materials
- Heavy duty, triple-lock buckle keeps the belt secure
- Quickdraw access to your cameras
- Two-position, self-locking camera holsterCamera Plates have 1/4"x20 mounts for compatibility with all tripod adapter plates
- Belt fits waists 28 - 50 inches (71 - 127cm)
- Includes Lens Collar Plate for carrying cameras with longer lenses
INCLUDES:
(1) SpiderPro Single Camera Belt v2 + Camera Holster
(1) Second Camera Pad + Camera Holster
(2) DSLR Camera Plates
(1) Lens Collar Plate v2
IMPORTANT:
We do not recommend moving the pre-installed Spider Pin.
We pre-install a pin into the right side with Loctite to ensure a secure hold.
If a pin is required for carrying on the opposite side, we recommend purchasing an additional Spider Anti-Twist Pin and installing separately.
| Offers: N/A |
| Offer Category: Bags and Cases |
| Offer Product Type: Straps and Belts |
| Colour: N/A |
| Height (mm): N/A |
| Length (mm): N/A |
| Width (mm): N/A |
| Internal height (mm): N/A |
| Internal length (mm): N/A |
| Internal width (mm): N/A |
| Weight (g): N/A |
| Laptop section: N/A |
| Bag Material: N/A |
| Personal section: N/A |
| Tripod connection: N/A |
| Bag Type: N/A |
| Notes: N/A |
Would you like to give any feedback about this page?
Complete our feedback formWriting your review
Sign In / Register
Existing Customer Login
If you are already a member, fill in the details below to login & view your account.
Condition guide
Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.
- Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
- Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
- Cameras – Should have no marks on the LCD screen
- Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
- Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes with only light signs of use and the product has been fully tested and is in great working order.
- Cameras – The LCD screen may have small signs of wear that does not affect its display
- Lenses – The mount of the lens will start to show signs of wear
- Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
- Cameras – LCD screen may have scratches or wear that is starting to affect the display.
- Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
- Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
- Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
- Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.
*All of our used items are listed with the accessories that are included. If they are not listed, then they will not be supplied at the point of purchase.
Peace of mind with our 6 month warranty
This product has been thoroughly tested by our team of photographers and we are happy to give a 6 month warranty as a result. The number of tests depends on the individual product but we are confident in this product having tested all the major functions. Anything that isn’t as you would expect, we then make a note of and show this in the condition notes on the page.
So you can be confident you are buying a great piece of kit that’s been looked after by a fellow photographer and seen many extraordinary sights, tested by our team of photographers and now looking forward to being set free to capture more great images!
