- Call us: 01444 237070
- Contact Us
- Stores
- Sign In / Register
Rycote InVision USM Studio Kit
Product Code: 6681812P
Share this item:
The Rycote InVision USM Studio Kit is a universal microphone shock-mount and pop filter with up to 12dB better isolation from vibrations and no HF loss for virtually any mic that is ideal for vocals.
Trade in & Trade up
Looking to trade in your photo equipment? Get a quote now!
The Rycote InVision Studio Kit with USM is a complete suspension and pop filter system which combines the InVision Studio Universal Shockmount and Universal Pop Filter in one convenient package—everything you need to capture professional radio-ready recordings free from pops and noise.
Key Features
- Shockmount and Pop Filter System
- Supports Most Large-Diaphragm Condensers
- Patented Lyre Suspension System
- Attenuates Vocal Pops up to 20 dB
The shockmount supports any microphone with a diameter of 18 to 55 mm and weighing up to 1.65 lb. The patented vibration-resistant Lyre mount helps to reduce capsule and cable-borne noise and controlled tests at Rycote's factory show that it provides up to twice the isolation of traditional microphone suspension systems.
The pop filter is made with a custom mesh that attenuates frequencies up to 20 dB and is designed to reduce or eliminate pops caused by "b" and "p" plosives in vocal performances. Unlike other pop filters, this one causes no audible high-frequency loss, keeping the integrity and clarity of the original sound produced by your microphone.
With its universal screw clamp, the InVision pop filter not only works with the InVision USM but is designed to fit any universal shockmount with diameters between 1/8 and 1/2". When the time comes, the mesh filter is replaceable helping to maintain a clean, hygienic studio and the ergonomic frame is designed for comfort so you can focus on the performance and not on what's in front of you.
InVision Universal Pop Filter
- Mesh filter attenuates low-frequency vocal pops up to 20 dB with no audible high-frequency loss
- Ergonomic frame is designed for comfort when placed in front of the mouth and face
- The custom mesh filter is replaceable for cleaning or replacement
- Designed to fit the outer ring of any universal shockmount and most other mic suspensions
InVision Universal Shockmount
- Supports microphone with diameters of 18 to 55mm and weighing up to 1.65 lb
- Patented vibration-resistant Lyre mount helps reduce capsule and cable-borne noise
- Provides up to twice the isolation of traditional microphone suspension systems
Would you like to give any feedback about this page?
Complete our feedback formWriting your review
Sign In / Register
Existing Customer Login
If you are already a member, fill in the details below to login & view your account.
Condition guide
Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.
- Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
- Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
- Cameras – Should have no marks on the LCD screen
- Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
- Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes with only light signs of use and the product has been fully tested and is in great working order.
- Cameras – The LCD screen may have small signs of wear that does not affect its display
- Lenses – The mount of the lens will start to show signs of wear
- Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
- Cameras – LCD screen may have scratches or wear that is starting to affect the display.
- Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
- Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
- Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
- Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.
*All of our used items are listed with the accessories that are included. If they are not listed, then they will not be supplied at the point of purchase.
Peace of mind with our 6 month warranty
This product has been thoroughly tested by our team of photographers and we are happy to give a 6 month warranty as a result. The number of tests depends on the individual product but we are confident in this product having tested all the major functions. Anything that isn’t as you would expect, we then make a note of and show this in the condition notes on the page.
So you can be confident you are buying a great piece of kit that’s been looked after by a fellow photographer and seen many extraordinary sights, tested by our team of photographers and now looking forward to being set free to capture more great images!
