- Call us: 01444 237070
- Contact Us
- Stores
- Sign In / Register
ProMaster Monopod Air Support AS425
Product Code: 8100156P
Share this item:
Trade in & Trade up
Looking to trade in your photo equipment? Get a quote now!
ProMaster Monopod Air Support AS425
Lightning-fast height adjustment without the need for traditional leg locks.
ProMaster's Air Support Monopod is lightning fast to deploy and adjust. Just pull to extend it or squeeze two buttons to retract it. Unlike a traditional monopod, the ProMaster Air Support requires no leg locks. Its unique air pressure system saves time and even allows you to fine-tune the height while shooting!
This Kit includes a folding, 3-leg base as well as a soft monopod foot and a fabric storage case.
Use the 3-leg base for the best stability. A ball joint is built into the 3-leg base which allows the monopod to pan and tilt. This ball joint can be locked so the unit will not tilt but can still pan. The legs of the base can be folded-up for easy transport. A soft foot is attached to the bottom of the 3-leg base for use when the legs are folded. Additionally, the soft foot can be installed directly on to the monopod when the 3-leg base is removed. This creates a smaller, lighter rig with a more traditional, single-foot. The connection between the 3-leg base or soft foot and the bottom of the monopod is a robust 3/8"-16.
The main connection at the top of the Air Support is a reversible bolt that can be used to attach a camera or head. One side of the bolt is a ¼”-16 thread which is common to most cameras and some heads. The opposite side is a larger 3/8”-16 thread which is common to many heads.
The AS425 is a 4-section monopod kit with a maximum working height of 62 3/4" and a maximum load rating of 8 lbs. 13 oz. It collapses down to 24” (with the 3-leg base installed) for easy transport. For more information see the specifications section of this listing.
Key Features:
- Rapid Height Adjustment, no leg locks to fuss with
- Convertible between 3-leg base and single-foot monopod
- 3-leg base has a built-in ball joint for smooth panning and tilting
- Ball joint lock allows for smooth, even panning without tilt
- Reversible 1/4"-20 / 3/8"-16 bolt for attaching a camera or head
SPECIFICATIONS
Includes:
AS425 Monopod
3-Leg, Folding Base
Soft Monopod Foot
Fabric Storage Case
Kit Specifications:
Maximum Working Height: 62 3/4" / 159.4 cm
Minimum Working Height: 24 3/4" / 62.9 cm
Folded Length: 24" / 61 cm
Maximum Load: 8 lbs 13 oz / 4 kg
Weight: 2 lbs 1/2 oz / 0.92 kg
4-Section Aluminium
Note: Kit specifications are with 3-leg base installed & soft foot
Would you like to give any feedback about this page?
Complete our feedback formWriting your review
Sign In / Register
Existing Customer Login
If you are already a member, fill in the details below to login & view your account.
Condition guide
Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.
- Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
- Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
- Cameras – Should have no marks on the LCD screen
- Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
- Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes with only light signs of use and the product has been fully tested and is in great working order.
- Cameras – The LCD screen may have small signs of wear that does not affect its display
- Lenses – The mount of the lens will start to show signs of wear
- Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
- Cameras – LCD screen may have scratches or wear that is starting to affect the display.
- Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
- Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
- Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
- Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.
*All of our used items are listed with the accessories that are included. If they are not listed, then they will not be supplied at the point of purchase.
Peace of mind with our 6 month warranty
This product has been thoroughly tested by our team of photographers and we are happy to give a 6 month warranty as a result. The number of tests depends on the individual product but we are confident in this product having tested all the major functions. Anything that isn’t as you would expect, we then make a note of and show this in the condition notes on the page.
So you can be confident you are buying a great piece of kit that’s been looked after by a fellow photographer and seen many extraordinary sights, tested by our team of photographers and now looking forward to being set free to capture more great images!
