- Call us: 01444 237070
- Contact Us
- Stores
- Sign In / Register
LEE Filters SW150 Mark II System Filter Holder
This product is no longer available
Product Code: L339240G
Share this item:
Landscape photographers can make use oversized ultra wide angle lenses with the LEE Filters SW150 Mark II System Filter Holder without vignetting and where a fixed lens hood may be in place.
Trade in & Trade up
Looking to trade in your photo equipment? Get a quote now!
LEE Filters SW150 Mark II System Filter Holder Summary
Landscape photographers have long understood the benefits of ultra-wide angle lenses, but their design constraints made the use of filters virtually impossible. Now, the SW150 Mark II filter holder opens up opportunities for the creative use of filters, without the need to be concerned about vignetting.
The SW150 Mark II fits via a lens adaptor that has been specifically designed for that particular lens (the adaptor is purchased separately from the filter holder). Each adaptor consists of a front ring, a compression ring and a locking ring. When fitted, these form a collar that remains on the lens at all times.
The SW150 filter holder comes assembled with two filter slots, enabling you to use neutral density graduated filters in combination with other filters.
The holder also comes fitted with a Lightshield. The shield helps to prevent unwanted back reflections and creates a light tight seal enabling the use of both the Little and Big Stopper. Photographers who already own the SW150 Mark I can purchase the Lightshield separately and retro fit it to their existing SW150 filter holder. Store your Lightshield as flat as possible, preferably in the filter holder. This will keep it in shape during any temperature fluctuations and ensure that it works correctly. Keep the front face clean and clear of sand or grit. If using a long exposure filter, ensure that the Lightshield is seated properly and that the foam on the filter is accurately aligned with the edge of the Lightshield. Give the Lightshield the best chance to work correctly when shooting in bright conditions. Shade the edges manually by casting a shadow on the seal if direct sunlight is striking the holder. It is good practice to do this in all conditions anyway, to limit the chances of flare and rear reflections from your filters.
Lens compatibility:
The SW150 Mark II system is now suitable for use with the following lenses* (adaptors purchased separately from the filter holder). Browse our LEE Filters page for accessories.
- Nikon AF-S Nikkor 14-24mm f/2.8G ED
- Nikon 14mm f2.8 D AF ED
- Nikon PC NIKKOR 19mm f/4E ED Tilt-Shift
- Canon EF 14mm f2.8 L II USM
- Canon EF 11-24mm f4L USM
- Canon TS-E 17mm
- Fujifilm XF 8-16mm f2.8
- Olympus 7-14mm Pro f2.8
- Pentax FA 15-30mm f2.8 ED SDM WR
- Samyang 14mm f/2.8 ED AS IF UMC
- Sigma 12-24mm f4.5-5.6 DG HSM II
- Sigma 12-24mm f4 Art DG HSM
- Sigma 14-24mm f2.8 Art
- Sigma 14mm f1.8 DG Art
- Sigma 20mm f1.4 HSM Art
- Tamron 15-30mm f2.8 SP Di VC USD
- Tokina AT-X 16-28mm f/2.8 PRO FX
Can also be adapted to fit other lenses via the SW150 System Adaptor.
Full Details
SW150 MARK II Mark Filter system
This innovative system means it's now possible to use Filters with a more extensive range of ultra-wide angle lenses than ever before.
Landscape photographers have long understood the benefits of ultra-wide angle lenses, but their design constraints made the use of Filters virtually impossible. now, the SW150 MARK II Mark Filter system opens up opportunities for the creative use of Filters, without the need to be concerned about vignetting.
Lens compatibility
The SW150 MARK II Mark fits via a lens adaptor that has been specifically Designed for that particular lens (the adaptor is purchased separately from the Filter holder).
Each adaptor consists of a front ring, a compression ring and a locking ring. When fitted, these form a collar that remans on the lens at all times.
Filter Sizes
Due to the Size of the front element of ultra-wide angle lenses, the Filters for the SW150 MARK II system are larger than those in the standard 100mm range.
The Holder includes Filter slots and light-shield
The SW150 MARK II Filter holder comes assembled with two Filter slots, enabling you to use neutral density graduated Filters in combination with other Filters.
The holder also comes fitted with a light-shield. The shield helps to prevent unwanted back reflections and creates a light tight seal enabling the use of both the little and Big stopper.
Would you like to give any feedback about this page?
Complete our feedback formWriting your review
Sign In / Register
Existing Customer Login
If you are already a member, fill in the details below to login & view your account.
Condition guide
Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.
- Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
- Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
- Cameras – Should have no marks on the LCD screen
- Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
- Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes with only light signs of use and the product has been fully tested and is in great working order.
- Cameras – The LCD screen may have small signs of wear that does not affect its display
- Lenses – The mount of the lens will start to show signs of wear
- Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
- Cameras – LCD screen may have scratches or wear that is starting to affect the display.
- Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
- Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
- Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
- Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.
*All of our used items are listed with the accessories that are included. If they are not listed, then they will not be supplied at the point of purchase.
Peace of mind with our 6 month warranty
This product has been thoroughly tested by our team of photographers and we are happy to give a 6 month warranty as a result. The number of tests depends on the individual product but we are confident in this product having tested all the major functions. Anything that isn’t as you would expect, we then make a note of and show this in the condition notes on the page.
So you can be confident you are buying a great piece of kit that’s been looked after by a fellow photographer and seen many extraordinary sights, tested by our team of photographers and now looking forward to being set free to capture more great images!
